I. Product Overview
The Light Chemical Protective Suit is a professional-level hazardous chemical protective equipment that balances protectiveness and wearing comfort. It is suitable for medium-risk chemical operation environments with a service time of 4-8 hours.
II. Application Scope
It is mainly used in scenarios such as chemical production, hazardous chemical disposal, and laboratory protection, including: 1) Pipeline maintenance and leakage disposal in chemical plants; 2) Pesticide spraying operations; 3) Medical waste treatment; 4) Chemical accident rescue by emergency management departments; 5) High-risk experiment protection in scientific research institutes. It is particularly suitable for medium-concentration exposure environments involving non-volatile toxic substances, and serves as basic chemical protective equipment in industries such as industry, environmental protection, and medical care.
III. Product Features
The product emphasizes ergonomic design to improve wearing comfort. It achieves a good balance between protective performance and operational flexibility, with excellent durability and environmental adaptability, and reliable quality. Humanized detailed designs further enhance its practicality. It can meet the medium-risk protection needs of multiple fields such as chemical industry, medical care, and environmental protection, and is a cost-effective professional protective equipment.
IV. Main Technical Indicators
- ★ Tensile Strength Performance: Warp direction ≥ 16kN/m, Weft direction ≥ 14kN/m.
- ★ Adhesion Strength: 1.28kN/m
- ★ Tear Strength: Warp direction ≥ 109kN/m, Weft direction ≥ 93kN/m
- ★ Flame Retardant Performance: Flaming combustion ≤ 4.6s, Non-flaming combustion ≤ 1s, Damaged length ≤ 9.7cm
- ★ Seam Strength Performance: ≥ 1085N.
- ★ Puncture Resistance of Acid and Alkali Resistant Chemical Gloves: 23N.
- ★ Puncture Resistance of Sole: Left ≥ 1683N, Right ≥ 1690N.
-
- Cut Resistance Performance: No penetration.
- ★ Heat Aging Resistance Performance: After heat aging test at 125°C for 24h, the sample is non-sticky and non-brittle.
- ★ Electrical Insulation Performance: Breakdown voltage ≥ 5000V, Leakage current ≤ 0.1mA.
- ★ Anti-slip Performance of Sole: Initial slip angle ≥ 23°.
-
- Fabric Thickness: 0.45mm ± 0.05mm.
-
- Alkali Penetration Resistance Performance: No penetration within 1h under 6.1mol/L NaOH and 10mm liquid column.
-
- Fabric Breaking Strength Performance: Warp direction ≥ 800N, Weft direction ≥ 600N. (Note: The original "2 800N" is corrected to "≥ 800N" for rationality; if it is indeed "2800N", it can be adjusted to "Warp direction ≥ 2800N")
-
- Gasoline Resistance Performance: No cracks or stickiness after immersion in 120# gasoline for 30s.
-
- Abrasion Resistance Performance: No holes after 100 cycles of wear test on the sample.
-
- Flex Resistance Performance: No damage or breakage after more than 1000 flex cycles.
-
- Splash Liquid Tightness Performance: Total stain area < 3 times the standard stain area. (Note: The original "3 < standard stain area" is corrected to "3 times the standard stain area" for logical consistency)
-
- Jet Liquid Tightness Performance: Total stain area < 3 times the standard stain area. (Note: Same correction as above)
-
- Fabric Tear Resistance Performance: 230N.
- ★ Fabric Cold Resistance Performance: After folding the sample by 180°, clamping the folded part with a fixture, and conducting a cold resistance test at -25°C for 5min, the sample is taken out and straightened quickly, with no cracks on the surface.
- ★ Dexterity Performance of Acid and Alkali Resistant Chemical Gloves: Meets the Level 1 requirements specified in Table 9 of GA7-2004; the minimum diameter of the test rod completed under test conditions is 5.0mm, with a performance level of 5.
-
- Acid Penetration Resistance Performance: No penetration for more than 300min against 98% sulfuric acid, 60% nitric acid, 30% hydrochloric acid, and 40% sodium hydroxide.
- ★ Impact Resistance of Toe Cap: After a static pressure test of 10.78kN and an impact test with an impact hammer of 23kg mass and 300mm drop height, the gap height is ≥ 21mm.
Product Size: (To be filled in if specific size data is provided)
Product Weight: ≤ 4.5kg
V. Product Configuration
- 1 piece of Light Chemical Protective Suit
- 1 copy of Instruction Manual
- 1 Certificate of Conformity
Application Scope
It is mainly applied in multiple industrial fields, including:
- Firefighting and fire suppression
- Emergency material delivery
- Surveying and mapping
- Security protection
- Maritime supervision
- Logistics transportation
Endowed with the characteristics of heavy payload and long endurance, it can perform long-duration, large-scale patrol and monitoring tasks, as well as undertake operations like heavy cargo transportation and emergency rescue material delivery.
Product Features
- Remarkable payload capacity and ultra-long endurance
- Lightweight design while ensuring airframe strength
- Supports autonomous flight, autonomous landing, and automatic obstacle avoidance functions
- High intelligence and can adapt to a variety of complex mission environments
Main Technical Specifications
| Model | X250 Hybrid Gas-Electric UAV |
Frequently Asked Questions
Q: Do you have any discount?
A: Yes, if you buy large quantity, please contact us for special pricing.
Q: What's the delivery time?
A: Typically 10-15 days for standard products (up to 50 pieces).
Q: Do you have overseas distributors?
A: Yes, we have distributors in Korea, Singapore, Malaysia, UK, Iran, India and other countries.
Q: Can we use our logo on the products?
A: Yes, we offer OEM services with licensing agreements.
